Introduction of diaphragm valve

The structure of the diaphragm valve is very different from the general valve. It relies on a soft rubber film or plastic film to control the fluid movement. Commonly used diaphragm valve materials are divided into cast iron diaphragm valves, cast steel diaphragm valves, stainless steel diaphragm valves, and plastic diaphragm valves.

The structure of the diaphragm valve is very different from the general valve. It is a new type of valve and a special form of cut-off valve. Its opening and closing part is a diaphragm made of soft material, which connects the internal cavity of the valve with the valve. The inner cavity of the cover and the driving part are separated, and it is now widely used in various fields. Commonly used diaphragm valves include rubber-lined diaphragm valves, fluorine-lined diaphragm valves, unlined diaphragm valves, and plastic diaphragm valves.

Diaphragm valve is equipped with a flexible diaphragm or combined diaphragm in the valve body and valve cover, and its closing part is a compression device connected with the diaphragm. The valve seat can be weir-shaped, or it can be a pipe wall that passes through the flow channel. The advantage of the diaphragm valve is that its operating mechanism is separated from the medium passage, which not only ensures the purity of the working medium, but also prevents the possibility of the medium in the pipeline from impacting the working parts of the operating mechanism. In addition, there is no need to use any form of separate seal at the valve stem, unless it is used as a stable facility in the control of hazardous media. In the diaphragm valve, since the working medium is only in contact with the diaphragm and the valve body, both of which can use a variety of different materials, the valve can ideally control a variety of working media, especially suitable for chemically corrosive or suspended particles medium. The working temperature of the diaphragm valve is usually limited by the materials used in the diaphragm and the valve body lining, and its working temperature range is about -50~175°C. The diaphragm valve has a simple structure, consisting of only three main parts: the valve body, the diaphragm and the valve head assembly. The valve is easy to quickly disassemble and repair, and the replacement of the diaphragm can be completed on site and in a short time.